How To Clean A Microphone Head?

When you’re in the momentum of singing, suddenly an irritating sneeze interrupts you. Not to mention the sound of your voice after that sneeze. Very annoying right? This is an indication that the head of your microphone is dirty. But how to clean a microphone head? This is what you will learn in this article.

Procedures in Cleaning Microphone Head

If you want to know how to clean a microphone head, first, you need to bear in mind that the membrane of the microphone is sensitive. Once liquid sits inside, your microphone is at stake. So mind every step and don’t take the short cuts. Also, this procedure is for the usual vocal microphones.

What you need:

• Chamois or absorbent cloth
• Basin
• Water
• Mild soap
• Isopropyl alcohol
• Soft Brush or synthetic paint brush
• Long-nose pliers

What to do:

• Put water in a basin.
• Add a few drops of mild soap.
• Unscrew the grill of your microphone.
• Take off the foam inside using the long nose pliers.
• Start cleaning the grill using the brush.
• Dip the brush with the water solution.
• Brush off the visible dirt from the outer part of the grill.
• Remove the dirt of the foam.
• Spray the isopropyl alcohol to the grill.
• Wipe the grill with a clean chamois.
• Soak the foam in the water solution and rinse gently.
• Leave the grill and foam until dry.
• Clean the outer part of the body of the microphone with alcohol.
• Wipe it dry with the chamois.
• Note: Do not put anything at the membrane of the microphone just gently wipe it with a chamois.
• Put back the foam inside the grill.
• Screw back the grill to the microphone.

Delicate Microphones Like Condenser Microphones

You might be wondering how to clean a microphone head if you’re using the delicate and fragile one. Here are the instructions below:

What you need:

• Isopropyl alcohol
• Tissue
• Listerine mouthwash
• Soft bristle toothbrush

What to do:

- Unscrew the head of the mic.
- Pour an amount of Listerine to a small cup.
- Soak the toothbrush.
- Brush off the dirt on the grill.
- Wipe it with a tissue.
- Spray alcohol to the body and wipe it immediately.
- Note: Do not spray onto the membrane or diaphragm of the microphone.
- Gently wipe it with a soft tissue make sure there are no residues left.
- Screw back the grill.
- Cover it with a plastic bag to prevent the small particles from getting in.

Conclusion

Your allergy can be triggered by the dirt sitting on the head of your microphone. You may want to clean it but you aren’t sure what to do because you don’t want to cause damage to it. But now that you learned about how to clean a microphone head. You can have the courage to take action before it triggers our allergy again. Sing proud and loud with your clean microphone.