How To Clean A Microphone: A Quick Guide
Let's face it. The harsh truth about using microphones is that it could be very unsanitary. These devices get close to the mouth, which means it could be a carrier of germs, but before we dive into those dirty details, we're going to teach you how to clean microphone with a few practical steps.
A Quick Guide To Cleaning A Microphone
Cleaning a microphone should be done before and after every use to ensure it is germ-free and well-maintained. Microphones come in different forms and brands, so learning how to clean microphone types must be guided by a manufacturer's manual.
After referring to your manual, you can do some of these cleaning tips:
Step 1 - Prepare a mixture of lukewarm water and soap.
Step 2 - Remove your microphone's grid.
Step 3 - Dip a clean cloth to the mixture.
Step 4 - Dry the microphone thoroughly and reassemble the parts.
Step 5 - Make sure you dry the microphones for at least 72 hours before using it again.
Other parts of a microphone still have to be cleaned. These are the steps on how to clean microphone handles and cables.
NOTE: When cleaning the handle, be careful not to get liquid on its connector, located near the bottom of a handheld microphone. Block it with your finger or secure it with a tape.
Step 1 - Ensure your microphone is disconnected from the power outlet before cleaning.
Step 2 - Use a non-abrasive cloth or brush to apply a cleaner. These are some cleaning options to consider:
- a mixture of water and soap
- disinfecting wipes
- isopropyl alcohol
Step 3 - If you use soapy water to clean, wipe the residue off with a clean cloth dampened in water.
Step 4 - Hold the microphone up so any residual liquid will flow away from its element.
Step 5 - Avoid areas with switches and buttons while cleaning.
Cleaning the microphone’s foam windscreen pop:
Note: To ensure you have a thoroughly dry grill in place, you should clean spares and swap them if needed instead of unscrewing grills, cleaning, and reinstalling them.
Step 1 - Use a screwdriver to loosen the screws from the microphone.
Step 2 - Remove the grille and the foam.
Step 3 - Clean the grille with a non-abrasive toothbrush using water or isopropyl alcohol.
Step 4 - Clean the foam with warm water.
Step 5 - Dry the grill and foam thoroughly before putting it back on the microphone.
Step 6 - Ensure you don't use it within 24 hours to ensure you don't experience problems with your microphone.
Reminders For Cleaning Microphones
Safety always comes first, so make sure you disconnect any microphone from the power outlet before cleaning.
Be careful when using isopropyl alcohol as it might damage designs and color on your mic handle.
Make sure you allow your microphone to dry after cleaning.
A microphone is a source of germs and bacteria if not maintained well. It is your responsibility to learn how to clean microphone regularly so both you and other users are safe and of course, worry-free.