How To Fix A Wireless Microphone
Wireless microphones are advantageous to use. Since the day that they were introduced, our way of hosting events has been smoother and easier. But what if it breaks, do you know what to do to fix it? Worry not! Because in this article, you will learn how to fix a wireless microphone.
Steps in Fixing a Broken Wireless Microphone
If you are ready to do the procedures on how to fix a wireless microphone, make sure you have the following tools and follow the directions diligently. Below are the common problems that you can encounter with your wireless computer.
What you need:
- Gaff tape
Interference in the Microphone
How to fix a wireless microphone if the interference continues? Well, good news! You don’t need to use any tool to fix it. What you need to do is adjust the frequency. Every wireless microphone has a different built. So, for you to do this successfully, you need to refer to the manual information of your wireless mic. Change the frequency up to 2 MHz or lower than that to terminate the interference. You don’t have to do the guesswork if you have the so-called wireless frequency analysis program. This will help you get the best frequency for your mic and then terminate the interference easily.
Wireless Microphone Doesn’t Connect to the Receiver
The procedures on how to fix a wireless microphone that doesn’t connect to the receiver are quite easy. You don’t need a professional to help you with this problem. There are two ways to solve it. First, it could be the battery that causes it, so you need to make sure that the batteries you put inside are not drain or close to draining. Second, you need to move closer to the receiver. You may be too far or obstructed by a metal, body of a person, or tall walls.
You might be wondering how to fix a wireless microphone that unexpectedly changes the channel. Honestly, this is a rare case but we have a solution to that. First, you need to navigate the infrared receiver in your mic. Next, cut a strip of gaff tape and place it overhead the receiver. Easy right? No sweat.
Blockage in the Signal
How to fix a wireless microphone with a signal problem? Although this is the common problem that most of us encounter, it is not hard to fix. Actually, you don’t need to be a professional to do this. All you need to do it trace the blocking cause. It can be a wall, a person, or a metal. Move your receiver in a different place where there is no obstruction and position the antennas 90-degrees.
Wireless microphones are a great help in organizing or hosting an event. But if they are dysfunctional, you better drink some ginger tea because you’ll be using all your voice to be heard by the guest. But now that you already know how to fix a wireless microphone, you can prevent these problems from ruining the party or occasion. So have fun and enjoy your working microphone!